Home  > Collaboration > Discussion Forum > Active Discussions

Welcome to the COE Discussion Forum! 

 

To participate in the discussion forum, you must be logged in to the website.  If you forget your login information, please contact COE Headquarters at coe@coe.org or (800) 263-2255.

If you are new to the COE Discussion Forum and would like to participate, please register.
Register Today
COE 2009 Annual PLM Conference & TechniFair

COE DISCUSSION FORUM
Forums > COE Forums > Data Exchange
Subject: Translating ProE Solids to V5 Using STEP

You are not authorized to post a reply.   
Author Messages
NATENALVEN

29 Mar 2007 05:42 PM
Has anyone been successful translating ProE Solids to Catia V5 with modifiable parameters using STEP? if yes what options were used to make this successful?
RICK BARD

15 May 2007 02:10 PM
We've been doing this lately - I'll try to find the parameters for you - but I can tell you that not all of the PROE parts are converted into CATParts and CATProducts. In the test set that I just ran, ~1% (9 out of 802 parts) did not show up as CATParts or CATProducts. It appears that the problem is in the export of the STEP file: I grepped for the expected name in the file and found that the name in the STEP file didn't quite match the name in the assembly.
NATENALVEN

21 May 2007 02:11 PM
Thank you Rick, have you been able to identify what may be causing the root cause failures.
RICK BARD

31 May 2007 11:53 AM
Sorry for taking so long - we're using the out-of-the-box settings.
And no, we've not come up with a cause.
You are not authorized to post a reply.
Forums > COE Forums > Data Exchange > Translating ProE Solids to V5 Using STEP



ActiveForums 3.6

    

401 North Michigan Avenue, Chicago, IL 60611-4267 | (312) 321-5153 | (800) COE-CALL (U.S.)