Home  > Collaboration > Discussion Forum > Active Discussions

Welcome to the COE Discussion Forum! 

 

To participate in the discussion forum, you must be logged in to the website.  If you forget your login information, please contact COE Headquarters at coe@coe.org or (800) 263-2255.

If you are new to the COE Discussion Forum and would like to participate, please register.
Register Today
COE 2009 Annual PLM Conference & TechniFair

COE DISCUSSION FORUM
Forums > COE Forums > Data Exchange
Subject: Fanuc OMD

You are not authorized to post a reply.   
Author Messages
COE-FORUM-USER

24 Sep 2003 06:23 AM
Is it possible to create a numeric code within Catia, suitable for use on a fanuc omd controller?
It is linked to a dugard eagle 600 machining center, and we are running Catia V5 release 11

Can you reccommend any software if any is needed.

Many Thanks

Mark


Author: mark jones
COE-FORUM-USER

24 Sep 2003 03:18 PM
Mark,

You'll probably get more responses if you post your question under the CATIA MFG "board". All the NCers are there.

CATIA will output a "generic" APT file or CATIA clfile that is acceptable to most postprocessors. It sounds like you need a post for the Fanuc control. For starters you could look at the list of postprocessors in CATIA in C:\Program Files\Dassault Systemes\B11\intel_a\startup\Manufacturing. the documentation explains how to generate post/nccode output.

Mark Chitjian
cool1@us.ibm.com
IBM CATIA/PLM Technical Support Center
Poughkeepsie, NY

Author: Mark Chitjian
You are not authorized to post a reply.
Forums > COE Forums > Data Exchange > Fanuc OMD


ActiveForums 3.6

    

401 North Michigan Avenue, Chicago, IL 60611-4267 | (312) 321-5153 | (800) COE-CALL (U.S.)