Home  > Collaboration > Discussion Forum > Active Discussions

Welcome to the COE Discussion Forum! 

 

To participate in the discussion forum, you must be logged in to the website.  If you forget your login information, please contact COE Headquarters at coe@coe.org or (800) 263-2255.

If you are new to the COE Discussion Forum and would like to participate, please register.
Forum Highlight: CATIA V6

 

Get Answers to Your V6 Questions
Dassault Systèmes answers user questions about CATIA V6.  Discuss these answers and propose new questions with end users from around the world in the CATIA V6 Forum.

COE DISCUSSION FORUM
Forums > COE Forums > MFG
Subject: STL machining

You are not authorized to post a reply.   
Author Messages
COE-FORUM-USER

12 Jun 2003 01:54 PM
I've been machining point clouds, occassionally, for the
better part of a year so I think I've got a clue but not
much more.

As with most things, explaining is more difficult than doing.

I will work up a document to help guide you if you wish or
you can e-mail me for specific tips.
The doc needs to be done for others in my work group anyway.

Later,
Larry

Author: R Larry Call
BUSTERCHOPS


24 Sep 2008 06:19 PM
I had seen a message that mentioned that you were going to make a doc explaining machining .stl, have you made one?

I just wanted to know the process of CNC from an .stl. Can the .stl go straight to the NC programming software or does it need to be
processed some how. And how do you set up seam or part lines or designate check surfaces?

If you could answer I would appreciate it.

Thank you MJ
You are not authorized to post a reply.
Forums > COE Forums > MFG > STL machining


ActiveForums 3.6

    

401 North Michigan Avenue, Chicago, IL 60611-4267 | (312) 321-5153 | (800) COE-CALL (U.S.)