Home  > Collaboration > Discussion Forum > Active Discussions

Welcome to the COE Discussion Forum! 

 

To participate in the discussion forum, you must be logged in to the website.  If you forget your login information, please contact COE Headquarters at coe@coe.org or (800) 263-2255.

If you are new to the COE Discussion Forum and would like to participate, please register.
Register Today
COE 2009 Annual PLM Conference & TechniFair

COE DISCUSSION FORUM
Forums > COE Forums > CATIA V5
Subject: short cut to zoom

You are not authorized to post a reply.   
Author Messages
bendesarts

14 Aug 2008 11:50 AM

Hello Everybody,

I'd like to know a short cut to zoom.

I use for the moment the buttom as you can see in the files attached.

Thank you for your help

Attachment: 181450773232.bmp
SKWOK

14 Aug 2008 12:32 PM
There are 3 and a half 3D manipulation commands.

The first 3 all require the middle mouse button to be held down (the wheel).

Hold middle button only, then slide your mouse around = Translate/Pan your screen

Hold middle button + tap left mouse button, then slide your mouse forwards/backwards = zoom

Hold middle button + hold left mouse button, the slide your mouse around = rotate model

Middle tap = center screen on location + change center of rotation to that location

*note* right mouse button or the ctrl key also work in place of the left mouse button

I have to point out though, I strongly suggest formal CATIA training. There are a variety of possibilities for training. My company (at which I am an instructor) is just one of them.
Steven Kwok
PLM Solutions Consultant
CATIA V5 Instructor
TechniGraphics Inc.
CATIA V5 R16/17/18/19
CATVBA
VB 6.0
Visual Basic .NET 2003/2005
bendesarts

14 Aug 2008 05:54 PM

Thanks a lot for your help; it was exactly what i needed

Benjamin
You are not authorized to post a reply.
Forums > COE Forums > CATIA V5 > short cut to zoom


ActiveForums 3.6

    

401 North Michigan Avenue, Chicago, IL 60611-4267 | (312) 321-5153 | (800) COE-CALL (U.S.)