Home  > Collaboration > Discussion Forum > Active Discussions

Welcome to the COE Discussion Forum! 

 

To participate in the discussion forum, you must be logged in to the website.  If you forget your login information, please contact COE Headquarters at coe@coe.org or (800) 263-2255.

If you are new to the COE Discussion Forum and would like to participate, please register.
Register Today
COE 2009 Annual PLM Conference & TechniFair

COE DISCUSSION FORUM
Forums > COE Forums > CATIA V5
Subject: Geometry is not pickable

You are not authorized to post a reply.   
Author Messages
KanMan

06 Nov 2008 06:45 AM

We have some parts we got from a vendor that we need to program. We have r18 sp4, and the parts are the same. The problem is we can't pick any of the features on the CATPart. We can't pick holes or edges, surfaces, nothing. It's visible, we just can't seem to use it. Is there an explaination for this? Thanks.
MBERRY

06 Nov 2008 06:57 AM
KanMan,

I don't know why someone would do this, but I suspect some things in this part might have the "pickable" option turned off (this is in the properties panel for each item) I don't know of an easy way to find which features are affected because search doesn't have a criteria you can define for pickable or not. It might be changed on a body or geo set or some of the individual features within them... You might have to just poke around to find it.

Mike
KanMan

06 Nov 2008 07:09 AM

That was it. Had to dig a little to find it. Thanks a lot!
You are not authorized to post a reply.
Forums > COE Forums > CATIA V5 > Geometry is not pickable


ActiveForums 3.6

    

401 North Michigan Avenue, Chicago, IL 60611-4267 | (312) 321-5153 | (800) COE-CALL (U.S.)