Product Function (DPC) Sessions

The COE Product Function (DPC) Sessions exist is to assure that the CATIA users’ needs for enhanced functionality are properly communicated to the Dassault Systèmes developers. This includes Enhancement Requests as well as Top Strategic Requirements.

PRODUCT-AFS Functions: Arrangement & Fluid Systems

Laurent Bianchi, Dassault Systemes Kim Autry, Lockheed Martin Aeronautics Company Mary Hopwood, The Boeing Company

This session will present the CATIA Strategy for Fluid systems from Logical to Physical Design. The latest improvements of CATIA V5 and V6 Equipment & Systems products will be covered, including the new V6R2010X Live user experience for Piping & Tubing 3D Design with contextual commands that allow direct 3D manipulation for a  productive and simplified design process. Other topics as Specification driven 3D tubing design or component based Piping & Tubing data model in ENOVIA V6 will be included.

PRODUCT-AFS Requirements: Arrangement & Fluid Systems

Laurent Bianchi, Dassault Systemes Kim Autry, Lockheed Martin Aeronautics Company Mary Hopwood, The Boeing Company

The working session is only for members who have signed non-disclosure agreements (This is done at time of registration). Attend this session to share your experience, exchange your ideas, and offer suggestions regarding enhancements for future releases.  COE speaks directly with Dassault Systèmes through the Enhancements Requests process, led by the COE Development Planning Council (DPC). The primary objective of the COE (DPC) is to assure that the CATIA users' needs for enhanced functionality are properly communicated to the Dassault Systemes developers.  A high level road map for Arrangement & Fluid  sysems CATIA V6 products will be presented.

PRODUCT-CMP: Composites

Claire Fritz-Humblot, Dassault Systèmes  Dennis Doutre, The Boeing Company Bruce Gabel, Spirit Aerosystems Arun Saini, Gulfstream Aerospace

DPC-CMP-W Composites (CMP) DPC Working session covers new and future developments of V5Composites products and processes. DS will discuss new functionality in upcoming releases of CATIA. This portion of the session is CLOSED to software vendors and affiliates. DPC-CMP-S Composites (CMP) DPC Strategy session explores current (V5R20  and V6) capabilities of the Composite Part Design/Manufacturing workbench covering functions used in part design- manufacturing preparation processes of a laminate. Enhancement request status will be  reviewed by DPC chairs and DS. Current manufacturing functionalities and improvements will be discussed. This session is OPEN to all COE attendees.

PRODUCT-DAI: Data Exchange & Interoperability CATIA V4 & V5 Translators

Daniel Pyzak Dassault Systèmes

In this session, you'll get a detailed overview of what has been delivered in the last V5 and V6 releases around data exchange (STEP, IGES, Multi-CAD interfaces) and data interoperability (data comparison, cleaning, IP protection, ...)

PRODUCT-DEL Functions: DELMIA Process Planning & Manufacturing Simulation

Kevin Albers, Lockheed Martin Aeronautics Company Craig McDonel, The Boeing Company NC Kishore, Dassault Systèmes Deidra Donald, Dassault Systèmes

The DEL DPC strategy session covers current and future developments for the integrated Dassault Systemes’ solutions for Version 5 DELMIA Product Lifecycle Management offering. The DS development team will discuss, present and demonstrate new functionality in the upcoming release of DELMIA. The presentation will be followed by an open discussion on the planned future capabilities and gaps based on the needs of the attendees. This is an excellent opportunity to directly discuss your organization's future development plans with DS development managers.

PRODUCT-DEL Requirements: DELMIA Process Planning & Manufacturing Simulation

Kevin Albers, Lockheed Martin Aeronautics Company Craig McDonel, The Boeing Company NC Kishore, Dassault Systèmes Deidra Donald, Dassault Systèmes

The DEL DPC working session covers the Dassault V5 integrated software for the development and maintenance of manufacturing process plans, process data management and manufacturing process validation through its delivery to the shop-floor. Enhancement request status will be discussed and reviewed by the DPC chairs and the Dassault development team. Current manufacturing functionalities and improvements will also be discussed. The presentations will be followed by an open discussion by the attendees. This session is open to all COE attendees. This is an excellent opportunity to directly discuss your requirements and concerns with DS development managers.

PRODUCT-DNC Functions: Digital NC (Part 1)

Philippe Girodengo, Dassault Systèmes James Barkelew, Lockheed Martin Mark Chitjian, Dassault Systèmes

The DMN DPC strategy session covers new and future development directions of the CATIA Manufacturing products and processes. The DS development team will discuss, present and demonstrate new functionality in the upcoming releases of CATIA. This is an excellent opportunity to directly discuss your organization's future development plans with DS development managers.

PRODUCT-DNC Requirements: Digital NC (Part 2)

Mark Chitjian, Dassault Systèmes  James Barkelew, Lockheed Martin Philippe Girodengo, Dassault Systèmes

The DMN DPC working session covers the definition & simulation of manufacturing processes from design to production. Enhancement request status will be discussed and reviewed by the DPC chairs and the Dassault development team. Current manufacturing functionalities and improvements will also be discussed. The presentations will be followed by an open discussion by the attendees. This session is open to all COE attendees. This is an excellent opportunity to directly discuss your requirements and concerns with DS development managers.

PRODUCT-DRA: Drafting

Enrique Murphy, Hawker Beechcraft Dominique Gaunet, Dassault Systèmes

The Drafting & 3D Master (MBD) DPC working session covers the product specification process (conceptual or preliminary design), the product definition process (dimensioning, tolerancing,  annotations, symbols …) and the product presentation process (2D Layout of the product 3D definition, 3D query and filtering of dimensioning, tolerancing & annotations) using 2D Drafting and/or 3D tools over the complete product life cycle. Enhancement request status will be discussed and reviewed by the DPC chairs and the Dassault Systemes development team. Current Drafting and 3D Master functionalities and improvements will also be discussed. The presentations will be followed by an open discussion by the attendees. This is an excellent opportunity to directly discuss your requirements and concerns with DS development managers: The Drafting & 3D Master (MBD) DPC strategy session covers the product specification process (conceptual or preliminary design), the product definition process (dimensioning, tolerancing,  annotations, symbols …) and the product presentation process (2D Layout of the product 3D definition, 3D query and filtering of dimensioning, tolerancing & annotations) using 2D Drafting and/or 3D tools over the complete product life cycle. The Dassault Systemes development team will present and demonstrate new functionalities of the CATIA V5 and V6 releases. This session is open to all COE attendees. This is an excellent opportunity to directly discuss your organization's future development plans with DS development managers.

PRODUCT-EASO Functions: Engineering Analysis, Simulation & Optimization

Lee Krueger, The Boeing Company Jon Weining, Dassault Systèmes Bob Deragisch, Parker Hannifin John Modesto, Dassault Systèmes, SIMULIA

The EASO DPC strategy session covers new and future development directions of the Catia V6 based engineering analysis, simulation, optimization & kinematic products. The DS development team will discuss the content of V6 analysis along with insight into their strategic and future plans.  The presentation will be followed by an open discussion by the attendees to directly discuss your organization's future development plans with DS development managers. After the presentation, the DPC committee will like to provide open discuss with what the user are looking for to improve the EASO DPC sessions.

PRODUCT-EASO Requirements: Engineering Analysis, Simulation & Optimization

Lee Krueger, The Boeing Company Jon Weining, Dassault Systèmes Bob Deragisch, Parker Hannifin John Modesto, Dassault Systèmes, SIMULIA

This EASO DPC session covers the processes and products used in Catia V5 for engineering analysis, simulation, optimization and kinematics.  This session is open to all COE attendees and is an excellent opportunity to get an overall understanding of many of the new tools & enhancements available to analyze structures and mechanical systems.  The DS development team will discuss, present and demonstrate new functionality in the upcoming releases of CATIA V5, SIMULIA and relevant technologies. The session will also present the status of current enhancement requests and provide an open discussion by the attendees with the DPC chairs and the Dassault development team on future enhancements.

PRODUCT-EME Functions: Electro-Mechanical Engineering

Timothy Suhr, The Boeing Company Laurent Bianchi, Dassault Systèmes Dimitri Steijlen, Dassault Systèmes  Marlon Woodward, Lockheed Martin Aeronautics

Electro-Mechanical Engineering session will illustrate how DS V6 Electrical products shorten the electrical design process by supporting the lifecycle from Requirements and requirements decomposition to physical 3D wire harness routing and manufacturing documentation. CATIA V6 PLM electrical products take benefits of ENOVIA V6 Requirement Functional Logical Physical product definition to support a highly collaborative design process that facilitates the management of all electrical data. Dassault Systèmes will be giving you a teaser of what's coming in CATIA V6R2011 with the new electrical logical design product that leverage the CATIA Systems product portfolio. CATIA Electrical Logical Editor will provide the electrical logical data model in the PLM database in order to enable an integrated logical to physical electrical process (as an infrastructure for electrical CAA partners and logical specifications for generative CATIA physical wire harness design). CATIA V5R20 improvements in the electrical domain will be presented as well.

PRODUCT-EME Requirements: Electro-Mechanical Engineering

Timothy Suhr, The Boeing Company Laurent Bianchi, Dassault Systemes Dimitri Steijlen, Dassault Systèmes  Marlon Woodward, Lockheed Martin Aeronautics

The working session is only for members who have signed non-disclosure agreements (This is done at time of registration). Attend this session to share your experience, exchange your ideas, and offer suggestions regarding enhancements for future releases. COE speaks directly with Dassault Systèmes through the Enhancements Requests process, led by the COE Development Planning Council (DPC). The primary objective of the COE (DPC) is to assure that the CATIA users' needs for enhanced functionality are properly communicated to the Dassault Systemes developers. This includes enhancement requests as well as top strategic requirements.   Roadmap of Electro-Mechanical Engineering next releases from the Generative Systems R&D team will be shared.

PRODUCT-KBE Functions: Knowledge Based Engineering

Brian Prasad, Parker Hannifin/Parker Aerospace Francois Riche, Dassault Systèmes Mark Williams, The Boeing Company

A key objective of Dassault Systemes Knowledgeware Product Suit is to offer CATIA users strong opportunities to quantify and integrate their competitive knowledge, heuristics rules and design process within an unified PLM Framework. CATIA Knowledgeware suit provides a number of tools for capturing all sorts of knowledge -- from product definition/inception to manufacturing/production. Strategic applications of such tools bring direct results such as increase of the productivity, capturing of mundane (repetitive) tasks, preservation and sharing of critical expertise in the company, dramatically increase in the reuse of the best practices, thus leaving more time for innovation and NPD. The strategy session will explain the role of the different Knowledgeware products within 3D PLM and detail the basic scenarios that can be implemented with your solutions. Presentations and process oriented demonstrations will provide attendees with all necessary information concerning the latest CATIA release (V6). Then an open discussion will be dedicated to attendee's new requirements/interest in KBE topics. This session is open to all conference attendees.

PRODUCT-KBE Requirements: Knowledge Based Engineering

Brian Prasad, Parker Hannifin/Parker Aerospace Francois Riche, Dassault Systèmes Mark Williams, The Boeing Company

The working session is only for members who have signed non-disclosure agreements. Attend this session to share your experience, exchange ideas, and suggest enhancements for future releases. DS KBE Domain team is looking for your  inputs as to what functions/features in KBE KnowledgeWare suit of tools (Knowledge Advisor, Knowledge Expert, Product Knowledge Template, Product Engineering Optimizer, and Business KnowledgeTemplate) are working correctly and what you would like to see added in the future. Please contact one of the DPC chairs for more information on how to submit requirements for CATIA/KBE (knowledge-based Engineering) Solutions.