If you find a bug or have a workaround in V5R23 SP-xx, please put it here.

Dave Frank

If you find a bug or have a workaround in V5R23 SP-xx, please put it here.

Hi Friends,

If you find a bug or have a workaround in V5R23 SP-xx, please put it here.

Please be sure to state the Service pack also

The intent here is so all the COE members can do the following.

  • Have visibility of what is ahead so they can decide to upgrade
  • If they do choose to upgrade, they will have advance knowledge of known issues.
  • We can help each other, with workarounds

Thanks

Dave

Oh, and Let’s try to keep these Bug Bulletin Boards clean, and Hijack free, so the information is easy to read.


Dave Frank  *    Bell Helicopter *  Grand Prairie Texas

Advanced Computer Aided Manufacturing Systems Engineer

COE Product Co-Chairman, Digital Numerical Control

 

Dave Frank

RE: If you find a bug or have a workaround in V5R23 SP-xx, please put it here.
(in response to Dave Frank)

bug with R23SP2. 

 

When doing a profile contouring operation with a face mill. 

 

Regarding selected relimiting elements for the start and stop. 

 

 When setting  relimiting elements  to out or in they work fine.  When setting  relimiting elements  to  have one set to out and one to on they will both stop on.  When  set limit 1 to on and limit 2 to in it works correctly but when I set limit 1 to in and limit 2 to on it stops out some 77.0”. 

 

 It seems to work correctly with and end mill but not a face mill.

 

 

Suggested workaround #1:

When you want on….. use  or in out  and use minus  - (Half the diameter) , instead of on.



EDIT  Please note this bug has been submitted by a COE member. I will advise on the SR Number 


Dave Frank  *    Bell Helicopter *  Grand Prairie Texas

Advanced Computer Aided Manufacturing Systems Engineer

COE Product Co-Chairman, Digital Numerical Control

 

Edited By:
Dave Frank[Bell Helicopter] @ Oct 30, 2013 - 02:37 PM (America/Pacific)