AEC Roll Call

Instead of bumping my thread in the GD, I decided repost here:

Who out there is using CATIA in the AEC market? What are your results? What worked/didn't work? 

I'm on the owners side in the AEC market and I'm interested in how CATIA could be leveraged. 

 

David,

Hydro Quebec is one of our biggest accounts. Bath Iron Works (shipbuilding) also uses the Equipment and Systems applications. Both are V5 customers.

Best Regards,

Gary MCCUE

Senior Industry Process Consultant, Technical Leadership

Marine & Offshore




Mobile: +1 860 287-7908
[login to unmask email]<mailto:[login to unmask email]>

[3DS Logo]

3DS.COMhttp://www.3ds.com


Dassault Systemes Services LLC | Dassault Systemes Services LLC, Remote user | Remote user, | United States



From: David Adam Denysenko [mailto:[login to unmask email]
Sent: Thursday, September 06, 2012 3:04 PM
To: [login to unmask email]
Subject: [aecshipbldgforum] - AEC Roll Call


Instead of bumping my thread in the GD, I decided repost here:

Who out there is using CATIA in the AEC market? What are your results? What worked/didn't work?

I'm on the owners side in the AEC market and I'm interested in how CATIA could be leveraged.



-----End Original Message-----

This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.

If you are not one of the named recipients or have received this email in error,

(i) you should not read, disclose, or copy it,

(ii) please notify sender of your receipt by reply email and delete this email and all attachments,

(iii) Dassault Systemes does not accept or assume any liability or responsibility for any use of or reliance on this email.

For other languages, go to http://www.3ds.com/terms/email-disclaimer

Not to mention us at SNC Lavalin



Vince Gattola
Spécialiste PLM CATIA / PLM Specialist CATIA

SNC-Lavalin - Division Hydro
1801, avenue McGill Collège, 12e étage, Montréal, Qc, Canada H3A 2N4

((514) 393-8000, Ext. 8374
(Cell:(514) 975.2000
[login to unmask email] <mailto:[login to unmask email]>





From: MCCUE Gary [mailto:[login to unmask email]
Sent: September 6, 2012 3:22 PM
To: [login to unmask email]
Subject: [aecshipbldgforum] - RE: AEC Roll Call



David,



Hydro Quebec is one of our biggest accounts. Bath Iron Works (shipbuilding) also uses the Equipment and Systems applications. Both are V5 customers.



Best Regards,


Gary MCCUE

Senior Industry Process Consultant, Technical Leadership

Marine & Offshore




Mobile: +1 860 287-7908
[login to unmask email] <mailto:[login to unmask email]>




3DS.COM http://www.3ds.com


Dassault Systemes Services LLC | Dassault Systemes Services LLC, Remote user | Remote user, | United States





From: David Adam Denysenko [mailto:[login to unmask email]
Sent: Thursday, September 06, 2012 3:04 PM
To: [login to unmask email]
Subject: [aecshipbldgforum] - AEC Roll Call



Instead of bumping my thread in the GD, I decided repost here:

Who out there is using CATIA in the AEC market? What are your results? What worked/didn't work?

I'm on the owners side in the AEC market and I'm interested in how CATIA could be leveraged.





-----End Original Message-----

This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.

If you are not one of the named recipients or have received this email in error,

(i) you should not read, disclose, or copy it,

(ii) please notify sender of your receipt by reply email and delete this email and all attachments,

(iii) Dassault Systemes does not accept or assume any liability or responsibility for any use of or reliance on this email.

For other languages, go to http://www.3ds.com/terms/email-disclaimer



-----End Original Message-----

Sorry Vince, I am on vacation and not thinking clearly.

Best Regards,

Gary MCCUE

Senior Industry Process Consultant, Technical Leadership

Marine & Offshore




Mobile: +1 860 287-7908
[login to unmask email]<mailto:[login to unmask email]>

[3DS Logo]

3DS.COMhttp://www.3ds.com


Dassault Systemes Services LLC | Dassault Systemes Services LLC, Remote user | Remote user, | United States



From: Gattola, Vince [mailto:[login to unmask email]
Sent: Thursday, September 06, 2012 3:56 PM
To: [login to unmask email]
Subject: [aecshipbldgforum] - RE: AEC Roll Call

Not to mention us at SNC Lavalin

Vince Gattola
Spécialiste PLM CATIA / PLM Specialist CATIA
SNC-Lavalin - Division Hydro
1801, avenue McGill Collège, 12e étage, Montréal, Qc, Canada H3A 2N4
*(514) 393-8000, Ext. 8374
*Cell:(514) 975.2000
[login to unmask email]<mailto:[login to unmask email]>


From: MCCUE Gary [mailto:[login to unmask email]
Sent: September 6, 2012 3:22 PM
To: [login to unmask email]<mailto:[login to unmask email]>
Subject: [aecshipbldgforum] - RE: AEC Roll Call

David,

Hydro Quebec is one of our biggest accounts. Bath Iron Works (shipbuilding) also uses the Equipment and Systems applications. Both are V5 customers.

Best Regards,

Gary MCCUE

Senior Industry Process Consultant, Technical Leadership

Marine & Offshore




Mobile: +1 860 287-7908
[login to unmask email]<mailto:[login to unmask email]>

[3DS Logo]

3DS.COMhttp://www.3ds.com


Dassault Systemes Services LLC | Dassault Systemes Services LLC, Remote user | Remote user, | United States



From: David Adam Denysenko [mailto:[login to unmask email]
Sent: Thursday, September 06, 2012 3:04 PM
To: [login to unmask email]<mailto:[login to unmask email]>
Subject: [aecshipbldgforum] - AEC Roll Call


Instead of bumping my thread in the GD, I decided repost here:

Who out there is using CATIA in the AEC market? What are your results? What worked/didn't work?

I'm on the owners side in the AEC market and I'm interested in how CATIA could be leveraged.



-----End Original Message-----

This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.

If you are not one of the named recipients or have received this email in error,

(i) you should not read, disclose, or copy it,

(ii) please notify sender of your receipt by reply email and delete this email and all attachments,

(iii) Dassault Systemes does not accept or assume any liability or responsibility for any use of or reliance on this email.

For other languages, go to http://www.3ds.com/terms/email-disclaimer

-----End Original Message-----

-----End Original Message-----

This email and any attachments are intended solely for the use of the individual or entity to whom it is addressed and may be confidential and/or privileged.

If you are not one of the named recipients or have received this email in error,

(i) you should not read, disclose, or copy it,

(ii) please notify sender of your receipt by reply email and delete this email and all attachments,

(iii) Dassault Systemes does not accept or assume any liability or responsibility for any use of or reliance on this email.

For other languages, go to http://www.3ds.com/terms/email-disclaimer

Thats great. Thanks. i was expecting maybe some Skanska out there as well.

in what capacity do you use it Vince? I'm on the owners side myself, where do you think its most useful?

Hi David,



Here at SNC Lavalin Hydro division, Montreal Qc. Canada CATIA V5 is widely used and is our primary 3D CAD software. We design our Hydro installations, which include design in Geotechnical to Equipments and Systems and Analysis.



As for Equipments and systems we have , I would say now an extensive library for Piping, HVAC, Raceway and Conduit design. We are also in the midst of completing our Enovia V6 implementation. Our PLM solution for collaboration moving forward. In the past, we've worked with Windchill PTC, Smarteam and now Enovia V6.



Ciao,



Vince Gattola
Spécialiste PLM CATIA / PLM Specialist CATIA

SNC-Lavalin - Division Hydro
1801, avenue McGill Collège, 12e étage, Montréal, Qc, Canada H3A 2N4

((514) 393-8000, Ext. 8374
(Cell:(514) 975.2000
[login to unmask email] <mailto:[login to unmask email]>





From: David Adam Denysenko [mailto:[login to unmask email]
Sent: September 6, 2012 11:05 PM
To: [login to unmask email]
Subject: [aecshipbldgforum] - RE: AEC Roll Call



Thats great. Thanks. i was expecting maybe some Skanska out there as well.

in what capacity do you use it Vince? I'm on the owners side myself, where do you think its most useful?



-----End Original Message-----

thank you 

Why did you guys make the switch to Enovia?

Just saw that the Hampton Scott Group is running on Catia - is anyone from HSG on coe.org?  

Hey, 

Just wanted to chime in on this old post.  Zahner, Shop Architects, Mcgrath, Gehry Technologies (who previously used their own overlay on CATIA, Digital Project), and there are a few others.

 

Kyle Watson I ZAHNER I VDC TECHNICAL SPECIALIST

816-423-8318   [login to unmask email]

</s