I want to make all parts of an assembly into a single V5 part for
the purpose of easy manipulation.
Is there any way to do this?
Author: gopalakrishnan
Is there any way to do this?
Author: gopalakrishnan
COE Administrator
Product to part
April 19, 2004 08:11 AM
(in response to COE Administrator)
gopalakrishnan,
Yes, there is a way to convert an assembly into a part. The easiest way (and the only way I am going to tell you for right now) is to add the environment variable IRD_PRODUCTTOPART = 1. After you do this, you will have a new option under your Tools menu in the Assembly workbench: Convert Catproduct to Catpart. I think you need to be at Catia v5r12 or higher, but someone else on the forum can verify that for you.
This method I outlined is very quick and easy so I won't detail the workaround.
Author: Ken Patterson
Yes, there is a way to convert an assembly into a part. The easiest way (and the only way I am going to tell you for right now) is to add the environment variable IRD_PRODUCTTOPART = 1. After you do this, you will have a new option under your Tools menu in the Assembly workbench: Convert Catproduct to Catpart. I think you need to be at Catia v5r12 or higher, but someone else on the forum can verify that for you.
This method I outlined is very quick and easy so I won't detail the workaround.
Author: Ken Patterson
COE Administrator
Product to part
April 21, 2004 04:41 AM
(in response to COE Administrator)
Hi gopalakrishnan,
The Env Variable which is mentioned works from R10.
It becomes default properties in R13.
Cheers. Kennis Tang.
Author: Kennis Tang
The Env Variable which is mentioned works from R10.
It becomes default properties in R13.
Cheers. Kennis Tang.
Author: Kennis Tang
COE Administrator
Product to part
April 22, 2004 12:09 PM
(in response to COE Administrator)
In R13 it is possible to do it without any environment variable: in
Assembly Design, go to Tools - Generate CatPart from
Catproduct.
Regards
Author: jorge mallea
Regards
Author: jorge mallea
COE Administrator
Product to part
April 22, 2004 12:19 PM
(in response to COE Administrator)
In R13 it is possible to do it without any environment variable: in
Assembly Design, go to Tools - Generate CatPart from
Catproduct.
Regards
Author: jorge mallea
Regards
Author: jorge mallea
COE Administrator
Product to part
April 22, 2004 12:20 PM
(in response to COE Administrator)
In R13 it is possible to do it without any environment variable: in
Assembly Design, go to Tools - Generate CatPart from
Catproduct.
Regards
Author: jorge mallea
Regards
Author: jorge mallea
COE Administrator
Product to part
April 22, 2004 12:24 PM
(in response to COE Administrator)
In R13 it is possible to do it without any environment variable: in
Assembly Design, go to Tools - Generate CatPart from
Catproduct.
Regards
Author: jorge mallea
Regards
Author: jorge mallea
COE Administrator
Product to part
April 27, 2004 12:43 PM
(in response to COE Administrator)
I entered your environment variable and I see the option under
TOOLS. But when I select it, it prompts for new part number, I
enter something and cannot select OK.
Any ideas?
Using v5r11 sp5
Author: Andy Parrow
Any ideas?
Using v5r11 sp5
Author: Andy Parrow
COE Administrator
Product to part
April 27, 2004 02:34 PM
(in response to COE Administrator)
Andy,
Do you have yourself setup to manually enter your part numbers? You can find out by going to Tools > Options > Infrastructure > Product Structure > Product Structure tab. If you do, uncheck the Manual input checkbox. I have never been prompted for a part number and this is my only guess as to your problem.
Author: Ken Patterson
Do you have yourself setup to manually enter your part numbers? You can find out by going to Tools > Options > Infrastructure > Product Structure > Product Structure tab. If you do, uncheck the Manual input checkbox. I have never been prompted for a part number and this is my only guess as to your problem.
Author: Ken Patterson
COE Administrator
Product to part
February 16, 2005 05:23 AM
(in response to COE Administrator)
Andy! You have to select assembly from top of specification tree
and the Ok button is active.
COE Administrator
Product to part
September 23, 2006 02:44 PM
(in response to COE Administrator)
Hi!
in R16 there is the special module "product data filtering". Command is "Assembly to part".
B. R.
Lind
in R16 there is the special module "product data filtering". Command is "Assembly to part".
B. R.
Lind